In this tutorial, we will show you how to apply a set of corrections and effects to a series of photos. You will learn how to batch process an entire series of images by working on a representative image, and then you will learn how to create a preset so you can save corrections and apply them to other photos later on.
To follow this tutorial, you will need:
- DxO OpticsPro 10 (Essential or Elite edition)
- Some photos, preferably in RAW format
Whether in the context of professional reportage or vacation photos, each photo session usually ends with a fairly large number of photos to process. Since many photos in a series will have been shot under the same lighting conditions, you will save time by applying the same corrections to the entire series all at once, rather than manually applying the same corrections to each photo one at a time.
You can also use batch processing to apply an original overall rendering or look to all of your photos.
Depending on the kind of settings that you want to apply, you should make sure that you are working with a series of images shot under largely uniform conditions. For example, if you manually correct the exposure for a single image, it is unlikely that this correction will be relevant for shots taken under different lighting conditions. You should also avoid processing other photos using settings that are specific to correcting just one image — for example, an image that is strongly back-lit.
Thus batch processing is mainly useful in the following two situations:
- When processing a series of homogenous images shot under similar conditions
- When applying a specific set of corrections (or preset) to a group of photos
DxO OpticsPro is particularly suited to batch processing images. In fact, with certain functions such as Exposure compensation and DxO Smart Lighting, the software measures the exposure and analyzes the contents of each image in order to apply the best possible correction. So the settings for these two corrections (which are part of the DxO default preset automatically applied to every photo) will provide different values for each individual photo so as to obtain the best results for each one.
For this tutorial, we have chosen a series of images that were shot under the same lighting conditions. Here are the images in the series::
When you’re in the Organize tab, you can copy or move images to another folder by first choosing the Folder display option (instead of Project) in the left-hand panel. To copy an image into a different folder, simply drag and drop the thumbnail of the image into the desired folder. To move the image from one folder to another, drag and drop it into the desired folder while holding down the Shift key. You can also delete an image from a folder by clicking on the
icon in the image thumbnail. Don’t forget to take advantage of the Organize tab’s notation, filter, and sorting capabilities when you want to accurately display a selection of images.
With a homogenous series, as is the case here, you use any the photos to define your processing settings.
Here is the photo we will work on as our reference photo:
2.1 - Correct a reference photo
Apply your processing settings to the reference photo. In our example, we will proceed as follows:
- When you open the image in DxO OpticsPro, the DxO default preset is automatically applied.
- On top of the default corrections, in the Light and Color > Contrast sub-palette, apply a Contrast correction of +10 and a Microcontrast correction of +60 to improve the overall rendering.
- In the Light and Color > Color accentuation sub-palette, boost the Vibrancy to +20 and the Saturation to +5 to enhance the colors, particularly the blue of the sky.
2.2 - Save the corrections
You will need to copy and save the corrections for the reference photo to be able to apply them to the other images in the series.
Temporarily save the corrections applied to the reference photo by choosing Copy correction settings in the Image menu (keyboard shortcut: Ctrl + Shift + C on a PC or Cmd + Shift + C on a Mac).
So long as DxO OpticsPro is still open and you don’t select this function again, the settings will remain copied (i.e., temporarily saved).
2.3 - Apply the corrections to your photo series
In the image browser, select the photos to which you want to apply these same settings.
In the Image menu, select Paste correction settings (keyboard shortcut: Ctrl + Shift + V on a PC or Cmd + shift + V on a Mac) to apply the copied settings.
All of the photos in the series have been corrected in just a few clicks!
After applying these settings, we advise you to look at each photo to make sure the rendering is what you expected. You can adjust the settings on a case-by-case basis if need be.
As indicated in the preceding section, saving the correction settings by using the Copy correction settings command is temporary and cannot be used to apply the same settings to another batch of images later on.
We will now show you how to permanently save your set of custom corrections.
3.1 - Select a reference photo
We will start at the same place as in the first part: first we will select a representative image from our series which we will use to define our correction settings for the entire batch. Just as before, the DxO default preset is applied automatically, and we will once again add contrast and color corrections. Depending on the series of images that you process, you can also add other relevant corrections (for example, noise reduction for a series shot at high ISO).
3.2 - Save your corrections as a new preset
After you have applied all of the corrections that you want to your reference image, go to the Image menu and choose Create preset from current settings.
A dialog box will open in which you will need to enter a name for your preset and indicate where you want to save it.
To help you find your presets more easily, we advise you to create a dedicated folder for your own custom presets, and to give each preset an explicit name to help you remember what it does. DxO Optics Pro will group your custom presets in a dedicated sub-menu.
To verify that your preset has been saved in the folder that you’ve selected, open the Preset Editor (by default, in the pane to the left of the display area) and look through your folder(s) to find your preset.
After you’ve saved the preset, its correction settings are available to use whenever you want.
3.3 - Apply your preset to your photo series
To apply your preset to a series of images, start by selecting all the images in the image browser that you want to correct., and then go to the Preset menu and apply the preset saved in your custom presets folder.
If you want, you can examine the photos in your series to see how the preset looks for each one, and fine-tune the settings on a case-by-case basis if need be.
One especially interesting benefit of presets is being able to create and use them to systematically correct or suppress the dust specks on your sensor and/or lens that mar all the photos you shoot.
Here’s how to automatically remove dust specks: First, take a photo of a unified color field (e.g., a clear sky, a plain wall, etc.) while closing the lens diaphragm as much as possible. This will increase the depth of field and thus show all of the dust specks. This photo will serve as your photo of reference.
Then use the Dust tool in the Detail palette to remove the dust specks.
After you’ve gotten rid of the specks, save the correction settings as a new preset (per section 3 above). This means you can get rid of all your dust specks even before you have time to clean your sensor!
Photo credits : Christophe Gressin